How to Shock Your Swimming Pool Colorado

Swimming Pool Shock should be added to your swimming pool at least once each week, to keep pool water safe and clean. You should shock more frequently if the pool is used heavily, after you receive large amounts of rain, or during extended periods of hot, sunny weather. Shocking, or "super chlorinating", drastically raises the chlorine level for a short time. The chlorine level becomes so high that bacteria or anything organic in the pool water is completely destroyed. This is one of several very important steps in pool maintenance that every swimming pool owner should be familiar with.

Local Companies

Aqua Vita Spas
970-879-4390
1815 Central Park Plaza
Steamboat Springs, CO
Parker Pools & Spas, Inc.
(719) 542-7946
4047 Club Manor Dr
Pueblo, CO
Hanson Hot Spring Spas
719-593-7727
1835 Dublin Blvd.
Colorado Springs, CO
Hot Water Productions, Inc.
970-249-2566
2511 S. Townsend Avenue
Montrose, CO
Authority Spas & Home Recreation, Inc.
303-721-7727
5435 Boatworks Drive, #2
Highlands Ranch, CO
Mountain Home and Yard LLC
(970) 389-0958
443 Marmot Cir.
Silverthorne, CO
Aquality Construction
(303) 469-2229
3050 Industrial Ln #100
Broomfield, CO
International Hot Tub Co.
303-755-4772
1035 Zuni Street
Denver, CO
Salida Stove and Spa
719-539-2125
7330 West Highway 50
Salida, CO
The Spa Brokers Ii
(303) 375-6411
8791 Wadsworth Blvd
Westminster, CO
Data Provided by:
  

Provided By:

Steps

  1. Before pool shock is added to your swimming pool water the granular chemical must first be pre-dissolved in a bucket of water. All forms of pool shock are granular and should dissolve relatively quickly. Fill a 5-gallon bucket with water from the pool and slowly pour the granular pool shock into the bucket of water. NEVER add water to a chemical, always add chemicals to water.
  2. Stir the bucket well and agitate the water for one minute or more to dissolve the pool shock.
  3. With the filtration system running, slowly pour the bucket of dissolved shock directly in front of a return line fitting. You will see the water being carried out into the pool by the jet of water coming from the return line. Pour slow enough that all of the water from your bucket is carried out into the pool and does not settle to the pool floor.

Tips

  • When you are pouring the bucket of dissolved shock water into the pool and you near the bottom of the bucket (down to about 1/4 left in the bucket), you should fill the bucket back up with water. Stir the bucket of water again for one minute or more to dissolve left over shock granules at the bottom of the bucket, which did not dissolve the first time.
  • If you have a vinyl liner in your swimming pool you cannot allow un-dissolved pool shock to settle to the floor, because this may bleach or stain your pool liner.

Warnings

  • Always add chemicals to water. DO NOT add water to chemicals.
  • The manufacturers of pool shock products suggest that you wear protective goggles and other safety equipment to prevent injury. Follow the manufacturer's instructions on the packaging closely
  • Swimming in water with too much chlorine is very dangerous. Wait until the water reads 3ppm or less.

Sources and Citations

  • Please visit http://www.InTheSwim.com for a complete selection of quality swimming pool shock products.

Article provided by wikiHow, a wiki how-to manual. Please edit this article and find author credits at the original wikiHow article on How to How to Shock Your Swimming Pool. All content on wikiHow can be shared under a Creative Commons license.


Topics: 
Advertising Financial Services Insurance Real Estate
Business Services Health Internet Software
Education Home Services Legal Telecommunications
Family